I bet you own a few cords. You might have so many cords that they burst out behind your TV stand or below your desk. Play video games for any length of time and you’ll acquire all sorts of cords you don’t know what to do with. For just a few bucks you can rein that mess in though and make some sense of the cyberpunk sprawl lurking behind your TV or monitor.
There’s a lot of stuff that’s out of our control: stock markets, the weather, a pet cat’s claws. Messy cords aren’t one of them though. It’s a choice, and one you aren’t stuck with. More importantly, tidying things up will make it easier to sit down and enjoy your favorite games without being distracted by the black spaghetti spraying out from behind the TV at weird angles.
Everyone’s gaming setup is different. Some people house everything in a TV stand in their living room. Other’s have an auxiliary setup in their basement or bedroom exclusively for gaming. And then there are the sophisticated types who manage everything from a PC setup in their home office. Personally, I utilize all three, but the principles and tricks for managing the cords involved in each are similar enough.
Every console comes with both a power cord and HDMI output. An ethernet cord makes three if you’re really serious about your multiplayer ping and download speeds. If at all possible, it’s best for organizational purposes to have both consoles as close to one another and or the cable box and modem as possible. That’s because the goal of all this is always going to be to bundle your cords together. Having everything scattered to the far corners of your media cabinet or TV stand makes that practically impossible.
The power cords should all be going down to a power strip on the floor (it’s both energy efficient and helps protect against power surges), preferably one encased in a small, weighted box so you don’t have to look at it. I use a Bluelounge Cable with the lid taped down and that works well enough while a company called DMoose makes something similar with faux-wood look. The HDMI cords should all be headed in the same direction up to the TV, either directly in or into a minimal latency passthrough box. If your power outlet is in the ceiling or something weird, you’ll obviously have to improvise, but either way the idea should be to limit all the outgoing cords into no more than two bundles.
Cords are bundles of metal and plastic which have a tendency to get twisted and contorted over time. Do yourself a favor and try to take the stress off of them by not bending or forcing them into unnatural positions. Power cords are usually pretty heavy duty these days, but HDMI cords are often still rather flimsy. One of the easiest ways to help them last is by getting either and HDMI passthrough box so you only have one cord that’s actually going into the TV. The Kinivo 501BN is a good utilitarian option at around $40. The small box can take up to five HDMI connections with one output at 1080p and automatic switching to whatever device is turned on. However, depending on the speed of your HDMI cords and whether you have a 4K TV or not, something else might be called for, so it’s always prudent to ask around first at a place like AVForums.
Another simpler option is to buy angled adapters that let you plug your HDMI cords into connector that’s facing the same direction, rather than perpendicular as most TVs are. Monoprice makes HDMI port adapters of every imaginable permutation and they’re all under $2. This lets you avoid having the cord buckle out as it bends back down making it easier to keep your bundle of wires clean and taught.
With everything in place, you’ll want to zip tie it all together. Feel free to use velcro if you prefer, although I prefer zip ties because they’re both cheap, hard to see, and easy enough to replace if you decide you need to move or reconfigure something later. I like to use a zip tie every four to six inches, which might seem excessive but when it keeps everything tight and snug it feels worth it. The goal after all is to consolidate the profile of every cord in the bundle. I start zip tying everything as close to the inputs on the consoles as possible and then as often as necessary to wherever they’re going.
In most circumstances having only one main set of wires running vertically behind your TV stand or media cabinet will be improvement enough. From there you can always knock some small picture-hanging nails into the back of your stand if it’s made out of wood and use them to guide the bundle of wires so they’re hidden behind shelves. If the back of your stand or cabinet has a solid backing, you’re already golden. In the case of a PC setup, this same logic works for the back of the desk legs or drawers. You can use adhesive-backed velcro for instance to tie up the bundle of wires running from the consoles or monitors on your desk down to where the PC is. If you’re monitor stand is negotiable, however, you’d probably be even better served by picking up a monitor stand that doubles as a cable management box. You’ll lose a little desk real estate but will create a nice hidden alley for your cords to run along before going down the side of the desk closes to the PC tower.
As someone with two phones, a tablet, and laptop, and a bunch of handhelds, charging stuff ad hoc just isn’t feasible anymore. Selecting a spot to install another nondescript power strip and have all your AC adapters ready to go is straightforward enough, but what will really help make it feel clean and orderly is a nice weighted cable holder to sit atop your chosen charging perch. This way you don’t have to worry about cords getting tangled or fumbling around with your precious electronics attached. A dedicated charging station, beyond letting you know everything’s always in the same spot, will also help clear up room in your already cluttered media cabinet. I’ve tolerated an ugly micro USB hanging off my PS4 into the room for far too long. At the very least I recommend spending the extra coin and picking up some nice charging docks to cut down on cords.
Between old component cables, extra HDMI cords, micro USBs, mini USBs, and now USB-c, I’m sure you have a bunch of stuff that you don’t actually ever use but are worried you might at some point. It’s time to make a final decision on this stuff: either throw it out or organize it in some nice plastic containers. I have a few I ordered from The Container Store, a place that continually ignites my aspirations toward a more organized life the same way someone who’s never managed to run for two weeks straight before still has a really nice pair of jogging shoes. Their small, stackable see-through drawers are a less than $10 each and four of them labeled should be enough to house all of your cord overflow in an inconspicuous utility closet, or even under the bed.
It’s always nice to have an extra cord in a pinch, but you’ll be reluctant to ever check your hidden stash unless everything has some sense and logic to it. Put charging cables in one compartment, retro cords in another, and even whatever random stuff you have left over from when you built that PC in another. And of course, ziptie all that stuff to keep it compact and untangled.
No doubt some day in the future it will be possible to transmit electrical signals seamlessly through the air from one thing to another. Utopian technology such as that hasn’t arrived yet though, so for now take a second and organize the literal lifeblood of your favorite hobby. You’ll feel better and your consoles will thank you, as will family, roomates, or that significant other who totally judges your ugly cords.