@fuchikoma: the best/worst part is that he does of all neko arc's voices just in a very deep manly voice, which reminds me isnt one, maybe 2 of neko arc's super moves or whatever like flood the screen with millions of her?
@fuchikoma: i THINK there might be a giant neko arc chaos too... Well I would gladly shell out atleast 100 bucks to get a melty blood game with the entire cast neko arcized. Or maybe Melty Blood with the fate/stay night cast included with everyone neko arcized...
Speaking of, does anyone ever play through this game 4 times to unlock the modes where you can go "devil trigger" the entire game?
It's frustrating to me that I have to beat the game 3-4 times before I can play the most fun mode. The game is difficult and frustrating enough (especially camera issues that cause me to fall) that I only beat it once and started my second playthrough.
I love the fast-paced action of it, and the Dante part was awesome as well, but a guy can only spend so much time on a single game. Y'know?! #devilmaycry4
This is pretty cool, I actually enjoyed DMC4 a lot, I'd probably rank it as my second favourite next to DMC3, Nero was surprisingly fun to play as. #devilmaycry4
@Kicken: I'd say the poses are very much dissimilar.
-Nero's right hand is palm up
-Demon's left hand is palm down
-Nero's holding the sword in his left hand pointing outwards from his body
-Demon's right hand is holding the sword inwards towards the front of his body
Edited by Gantz: Your Trusted Friend in Science. at 11/17/09 6:16 AM
Gantz: Your Trusted Friend in Science. was starred
Gantz: Your Trusted Friend in Science. was unstarred
I got the devil on my shoulder (over and over)
And I just can't sink any lower (lower and lower)
The hounds of hell are getting closer (closer and closer)
I got the devil on my shoulder (over and over)
FTO is right. United Cutlery swords are fit only for swinging at the air....and the air might provide a bit too much resistance from time to time. Half tang usually, and I don't mean the drink mix.
Still they look great & could probably stun a burglar.
Still, I'll never forget the time a friend was out in his yard, swinging his SUPPOSED full tang Museum Replicas/United Cutlery broadsword....at the air, mind you. He said he was swinging it over his head, and the handle suddenly FELT LIGHT IN HIS HANDS. He immediately started running, full-tilt, in a random direction.....because he knew the blade was somewhere, up in the air, and soon to be on its way back down to earth.
@stalin23: Whats not real about this? It's an actual sword based on one in a video game. More of a style over function approach, but still plenty lethal.
@MDevonB: For one, it doesn't cut as well as my aforementioned samurai sword. It looks good though. Just can't accept the fact that a replica is expensive than a real sword. (Mine is really shiny too, with an awesome grip!) :(
@stalin23: So, a claymore isn't a real sword since it doesn't cut as much as it cleaves? :P
Actually reading the linked to article however proves you right, and its not a real sword. Still wish I had the money though, would sharpen the edge as soon as I got it.
would cause a great deal of lols even if you did sharpen it. i wouldnt want to swing anything made by united cutlery, sharp or not. they're made as replicas and replicas only. the steel is brittle and they blades arent fixed in the handles properly.
id also love to see what stalin23 classes as an 'authentic replica' for less than what this will cost.
@FTO_dude: no no, I'm not saying authentic replica, I was referring to a *real* samurai sword. If you've seen one, you would just snicker at people owning a "replica", as the blades are truly master class. We got it cheap (relative to other real swords) about USD350+ converted from our currency.
@stalin23: If you got it for $350, then no way is that a _real_ katana, crafted by traditional methods. I saw a NOVA special on one of the very few remaining traditional swordsmiths in Japan, and it takes a three-person crew at least several months to craft a single blade to completion. There's no way they could afford to stay in business charging so little. No, for that price, what you have is surely either a mass-produced modern katana, or a quick-and-dirty handmade blade (i.e. something that took maybe one or two days _at_most_ to produce). While it may be a real edged sword, anyone who owns a truly master-quality katana would probably snicker at yours even more than any non-edged replica (at least the replica didn't cost $350).
@stalin23: Don't care. Whoever told you it was a "master quality blade" was probably waiting to ring up the sale. And noone prices their merchandise that low just because they're trying to sell it in a less afluent market. This is why there are so many Chinese LEGO clones. The real stuff costs too much for the average Chinese customer, and they won't price it low enough to be affordable because then they'd lose money on every sale. Clones, on the other hand, can be churned out locally for a pretty low cost, and priced to sell on the Chinese market. But they're still always going to be clones, and they're never going to be up to the level of quality that you're going to get with the real deal.
If it was a really-real master-quality katana, I'm sure the true value of it would be no less than five figures, so the only way it'd ever hit the $350 range is if someone stole it and had absolutely no idea what they'd got their hands on when it came time to unload it.
@stalin23: To elaborate on my reasoning, if you got it for $350, and it was not stolen property, there's no way the blade was properly hammer-welded from different grades of steel. The metal might be folded a few times to get the distinctive look, but the entire blade would certainly be formed from a single piece of pre-forged metal, just like pretty much any other generic forged blade from any other culture. And thus, for a katana, it would be nowhere near master quality, and would either be unable to hold a proper edge (too soft) or far too likely to snap or shatter (too hard).
Wow! Her ass looks like breasts! I mean the way they model breasts these days they're almost the same proportion.
Now who in their right mind would go to a fight wearing that? Same question with Wonder Woman. I mean what's your goal? To give them erections till they pass out? Or give 'em erections till they squirm and try to hide it while fighting?
11/17/09
Am I the only one who saw "Nero figure" and was hoping for one of Nrvnqsr Chaos? #devilmaycry4
11/17/09
11/17/09
also you get bonus points for doing the name right #devilmaycry4
11/17/09
In fact, I highly recommend it! :3
11/24/09
@fuchikoma: the best/worst part is that he does of all neko arc's voices just in a very deep manly voice, which reminds me isnt one, maybe 2 of neko arc's super moves or whatever like flood the screen with millions of her?
#speakup
11/24/09
I had no idea Neko Arc Chaos was a real character... my god, Tsukihime just got a lot cooler, haha!
11/25/09
#speakup
11/17/09
11/17/09
It's frustrating to me that I have to beat the game 3-4 times before I can play the most fun mode. The game is difficult and frustrating enough (especially camera issues that cause me to fall) that I only beat it once and started my second playthrough.
I love the fast-paced action of it, and the Dante part was awesome as well, but a guy can only spend so much time on a single game. Y'know?! #devilmaycry4
11/17/09
11/17/09
11/17/09
According to the game, they should. But that would likely make for a less striking figure.
Then again, they are already in the same pose just mirrored, so who the fuck knows what they are thinking!
11/17/09
-Nero's right hand is palm up
-Demon's left hand is palm down
-Nero's holding the sword in his left hand pointing outwards from his body
-Demon's right hand is holding the sword inwards towards the front of his body
11/17/09
And I just can't sink any lower (lower and lower)
The hounds of hell are getting closer (closer and closer)
I got the devil on my shoulder (over and over)
Billy Talent - Devil on my Shoulder #devilmaycry4
11/17/09
11/17/09
06/30/09
Still they look great & could probably stun a burglar.
Still, I'll never forget the time a friend was out in his yard, swinging his SUPPOSED full tang Museum Replicas/United Cutlery broadsword....at the air, mind you. He said he was swinging it over his head, and the handle suddenly FELT LIGHT IN HIS HANDS. He immediately started running, full-tilt, in a random direction.....because he knew the blade was somewhere, up in the air, and soon to be on its way back down to earth.
Be careful, kids. :p
06/29/09
06/29/09
06/30/09
06/30/09
Actually reading the linked to article however proves you right, and its not a real sword. Still wish I had the money though, would sharpen the edge as soon as I got it.
06/30/09
would cause a great deal of lols even if you did sharpen it. i wouldnt want to swing anything made by united cutlery, sharp or not. they're made as replicas and replicas only. the steel is brittle and they blades arent fixed in the handles properly.
id also love to see what stalin23 classes as an 'authentic replica' for less than what this will cost.
also:
[globalgear.com.au]
i havent seen photos of a real one but looks like thats your option.
06/30/09
06/30/09
If you got it for $350, then no way is that a _real_ katana, crafted by traditional methods. I saw a NOVA special on one of the very few remaining traditional swordsmiths in Japan, and it takes a three-person crew at least several months to craft a single blade to completion. There's no way they could afford to stay in business charging so little. No, for that price, what you have is surely either a mass-produced modern katana, or a quick-and-dirty handmade blade (i.e. something that took maybe one or two days _at_most_ to produce). While it may be a real edged sword, anyone who owns a truly master-quality katana would probably snicker at yours even more than any non-edged replica (at least the replica didn't cost $350).
06/30/09
06/30/09
06/30/09
Don't care. Whoever told you it was a "master quality blade" was probably waiting to ring up the sale. And noone prices their merchandise that low just because they're trying to sell it in a less afluent market. This is why there are so many Chinese LEGO clones. The real stuff costs too much for the average Chinese customer, and they won't price it low enough to be affordable because then they'd lose money on every sale. Clones, on the other hand, can be churned out locally for a pretty low cost, and priced to sell on the Chinese market. But they're still always going to be clones, and they're never going to be up to the level of quality that you're going to get with the real deal.
If it was a really-real master-quality katana, I'm sure the true value of it would be no less than five figures, so the only way it'd ever hit the $350 range is if someone stole it and had absolutely no idea what they'd got their hands on when it came time to unload it.
07/02/09
To elaborate on my reasoning, if you got it for $350, and it was not stolen property, there's no way the blade was properly hammer-welded from different grades of steel. The metal might be folded a few times to get the distinctive look, but the entire blade would certainly be formed from a single piece of pre-forged metal, just like pretty much any other generic forged blade from any other culture. And thus, for a katana, it would be nowhere near master quality, and would either be unable to hold a proper edge (too soft) or far too likely to snap or shatter (too hard).
06/29/09
06/29/09
06/29/09
I must have it...
06/29/09
06/29/09
06/30/09
Cold Steel sell swords that can cut through car doors. They don't seem to be having any trouble.
06/29/09
06/29/09
06/29/09
06/29/09
Hard.
06/29/09
I wish i could buy one of those heck i wish i could buy my all time favorite, the sword Mitsuhide use in the Samurai Warriors series "Hallowed Edge"
06/29/09
04/25/09
Now who in their right mind would go to a fight wearing that? Same question with Wonder Woman. I mean what's your goal? To give them erections till they pass out? Or give 'em erections till they squirm and try to hide it while fighting?
04/24/09